Standard V6
| Clean block (we will remove old cam bearings and freeze plugs) | $55.00 | ||
| Magnetic Particle check block for cracks | $25.00 | ||
| Check Cylinder wear | n/c | ||
| Bore and finish honing cylinders up to 040 | Bores up to 4.080 | $90.00 | |
| Bores up to 4.360 | $100.00 | ||
| |
|||
| Line Hone Main Bearing Bore (unless caps are burned, loose or mismatched) | $100.00 | ||
| Deck Block (Mill head gasket surface) (both sides) | $85.00 | ||
| Install cam bearings (plus parts) | $35.00 | ||
| Install freeze plugs (plus parts) | $20.00 | ||
| Check Crankshaft for size and straightness, and polish | $35.00 | ||
| Grind crankshaft | $105.00 | ||
| Resize rods | $70.00 | ||
|
Remove and replace pistons on rods |
$50.00 | ||
| Valve Job (Recondition cylinder heads) Cast iron heads | $175.00 | ||
| Surface head gasket surface (both heads) | $70-80 | ||
| Install Guides (cast heads) (plus parts) First one | $12.00 | $5.00 | Each Additional |
| Install hard exhaust seats (plus parts) First one | $25.00 | $6.00 | Each Additional |
| Balance crankshaft assembly | $175.00 |
All Prices are subject to change.
101706