Clean all $35.00
Clean timing cover $5.00
Clean bolts and push rods $15.00
High Performance V6 and V8
| Blocks | Cleaning | $50.00 |
| Inspecting for cracks (MT Magnetic particle) | $20.00 | |
| Pressure check for leaks | $50.00 | |
| Check line bore | $30.00 | |
| Check deck for bad areas and low places | n/c | |
| Measure height of deck to crank center line | $60.00 | |
| Check piston to deck height using your crank, rod and pistons | $60.00 | |
| Check cylinder wear | n/c | |
| Cylinder boring (up to .060) | $90.00 | |
| Cylinder boring (.070 to.125) | $125.00 | |
| Cylinder boring (over .125) | by job | |
| Torque plates on blocks (add) (if available) | $70.00 | |
| Installing sleeve and finish to size (most cases) up to 4.060 | $110.00 | |
| (sleeve included) over 4.061 | $125.00 | |
| Block decking (milling head surface) Square on BHJ Fixture | $125.00 | |
| "O" ring cylinders (wire included) copper wire | $60.00 | |
| "O" ring cylinders (wire included) stainless wire | $75.00 | |
| Line Hone Block with original caps (unless burned, loose, or mismatched caps) | $90.00 | |
| Splayed Caps or other semi finished | $350.00 | |
| Blocks with studs may cost extra | ||
| Remove old oil galley plugs and tap for allen head pipe plugs | $30.00 | |
| Mill both ends of block for intake fit | $35.00 | |
| Hone cylinders (Rigid hone) | $35.00 | |
| Plug holes in SB Chevy Deck (Large holes) | $40.00 | |
| Tap Valley holes for plugs or vents | $40.00 | |
| Install cam bearings (plus parts) | $30.00 | |
| Install freeze plugs (plus parts) | $15.00 | |
| Ultrasonic test cylinder walls for thickness | $40.00 | |
| Make detailed check of above | $75.00 | |
| Bore cylinders to correct bore location (small Chevy) includes squaring decks to crank center line | $275.00 | |
| Cranks | Clean (some jobs will require this) | $20.00 |
| Check crank for size, straightness, and polish | $30.00 | |
| Chamfer oil holes and polish | $30.00 | |
| Magnaflux-magnaglo inspection for cracks (must be cleaned) | $30.00 | |
| Cross drill mains (includes chamfer and polish) | $90.00 | |
| Regrinding race crank with large radius | $100.00 | |
| Welding worn or burned journals (Per journal) | $125.00-250.00 | |
| Offset grinding (Price on request) | ||
| Correct Index (Price on request) |
| Rods | Check big end for round (set of 8) | $30.00 |
| Check for straightness (set of 8) | $20.00 | |
| Resizing big end (if you use Stock Bolts) | $65.00 | |
| Resizing big end (ARP bolts) | $75.00 | |
| Hone for floating pins (w/oil hole) | $40.00 | |
| Magnaflux-magnaglo Inspection for cracks | $40.00 | |
| Side clearance (one side) (set of 8) | $45.00 | |
| Balancing (Complete balance job includes this) | $40.00 | |
| Bore rods and Install Bronze bushings and fit to Pin (Labor) | $125.00 | |
| Remove and replace bushings and pin fit (Labor) | $50.00 | |
| Pistons | Remove and replace on rods (Press type) (set) | $30.00 |
| Fly cutting for valve clearance SB Chevy. - Chry - FE Ford | $85.00 | |
| Most others | $75.00 | |
| Pin fitting for additional clearance | $30.00 | |
| Drilling holes from oil rings to pin | $50.00 | |
| Mill domes | $60.00 | |
| Balancing (Complete balance job includes this) (set) | $30.00 | |
| Flywheel | Grinding to true Flat type | $40.00 |
| Step type | $45.00 | |
| Balance flywheel (Internally balanced engine) Symmetrically balanced | $25.00 | |
| Balance flywheel (Externally balanced) We can match balance | $50.00 | |
| Misc. | Check bearing clearance (1 rod and 1 main) | $30.00 |
| (If we do the above when we are line boring or rod resizing, We can usually make your bearing clearance any size you want) |
|
|
| Check valve to piston clearance | $80.00 | |
| Degree Cam | $60.00 | |
| Clean intake manifold | $25.00 | |
| Clean oil pan $15.00 |
Clean all $35.00 |
|
| Clean valve covers $10.00 | ||
|
Clean timing cover $5.00 |
||
|
Clean bolts and push rods $15.00 |
||
| Mill sides of intake manifold (up to .040) | $70.00 | |
| Mill ends of intake manifold | $40.00 | |
| Thread repair and heli-coil | By Time |
All Prices are subject to change.
103006